Academics

Can I double count courses towards my major and a minor?

You cannot double count courses unless the course is in the free elective or engineering elective category of your BSIE in which case the course can be used towards the minor as well. Students in the Technology and Management program should discuss their minor program of study with their ISyE academic advisor.

Can I take courses as Pass/Fail?

Certain courses may be taken on a Pass/Fail basis. For undergraduate ISyE students these are limited to free electives, humanities and the additional social science (the required economics course, BOR history course and PSYC 1101 must be taken for letter grade). No ISyE courses may be taken on a Pass/Fail basis by a student seeking the BSIE degree unless the course is taken for free elective credit.

A maximum of 9 credit hours can be taken pass/fail

How do I change my major to Industrial Engineering?

ALL STUDENTS, (whether having accumulated 60 hours or not) who would like to change to the ISyE major must attend a Change of Major information session. See below for registration form.

Admitted First Year Students – attend change of major session

First Year students (non-transfers) are allowed one major change during the first 2 semesters of residence. After attending the change of major session student may submit the change of major form to the ISyE Academic Office (Fran Buser), however the form will not be submitted to the GT Registrar’s office until after the deadline for withdrawal from classes with a W grade in the first term of their enrollment. See here for the GT Academic Calendar. The change would be effective for the second term of enrollment.

Current GT students (non-First Year) – attend change of major session

GT students who have studied at GT for more than 2 semesters or have more than 60 hours must follow the ISyE Change of Major requirements below.

Transfer Students from other Universities – attend change of major session

ISyE follows GT Change of Major rules in addition to specific ISyE change of major requirements below.

Requirements for Non-First Year and Transfer Students:

ISyE change of major candidates must complete the following four GT courses::

  • ENGL 1102* or PSYC 1101*
  • CS 1301*, CS 1371, or CS 2316
  • MATH 2603
  • ISyE 2027

* If you have transfer credit for these courses, ISyE will pick an appropriate substitute course for you to take. Please email Fran Buser.

Additionally, change of major candidates must:

  • Earn at least a C in each of the four courses listed above;
  • Earn at least a 3.0 average in the four courses, weighing each course equally;
  • Have an overall Georgia Tech GPA of at least 3.0; and
  • Have a letter grade for the four courses (no transfer credit accepted).

General guideline for registration:

  1. Continue with MATH. The ISyE sequence is:
    • 1551 – Differential Calc
    • 1553 or 1554 – Intro to Linear Algebra or Linear Algebra
    • 1552 – Integral Calc
    • 2551 (if you take MATH 1553) or 2550 (only if you take MATH 1554) – Multivariable Calc or Intro Multiv Calc
    • 2603 – Intro to Discrete Math
  2. Add English 1102 if you need it. Otherwise, add a Humanities, PSYC 1101, ECON, etc.
  3. The first ISYE course, ISYE 2027, requires MATH 2551 (or MATH 2550) – you may register for ISYE 2027 if: either you have completed or are enrolled in MATH 2551. We strongly recommend taking MATH 2550 prior to ISYE 2027.
  4. Add a Lab Science – ISyE requires four semesters: Physics 2211 and 2212 and two other 4-hour lab sciences. See our website: https://www.isye.gatech.edu/academics/bachelors/current-students/curriculum
  5. Add CS 1301 – please see here for CS registration information: https://www.cc.gatech.edu/undergraduate-registration
  6. ISyE 2027 is major restricted until the last Wednesday of Phase II.

Sign up for an information session

How do I declare my concentration?
  • Log into Buzzport
  • On the Home tab, locate the “REGISTRATION AND STUDENT SERVICES “ channel
  • Select the “Registration – OSCAR” link
  • Select “Student Services & Financial Aid"
  • Select “Student Records”
  • Select “Change Program of Study”
  • Select "Change your Concentration"
  • Select your desired concentration and click “Submit Changes.”
How do I know what catalog year I am on?

If you are not sure of your Catalog Year, you can find listed on your DegreeWorks Audit.  It is listed on the black bar that is titled BSIE - Degree Requirements.

How do I withdraw from courses during the semester?

Georgia Tech policy allows students to withdraw (drop) from one or more courses each term, if they are permitted to do so by their major school. The specific drop-date is published in the academic calendar. ISyE follows Georgia Tech policy. However, students should be judicious to avoid waste of time and resources.  A decision to withdraw from a course is a serious one and should be made only after substantial deliberation and preferably in consultation with an academic advisor. See the Georgia Tech Catalog for rules and regulations on withdrawals. With the exception of part-time graduate students, students who withdraw from school and receive all grades of W will not ordinarily be permitted to re-enroll the next succeeding term. Refer to the Georgia Tech Catalog, Section VIII .B, for regulations regarding readmission.

If I repeat a class, will my first grade be removed from my GPA?

Unless a student is using Grade Substitution, all grades will be averaged into your GPA. Please see the official Grade Substitution Policy for details. A very limited Grade Substitution Policy exists for students who receive a D or an F in a course. The class must be repeated within one calendar year and the application for grade substitution must be submitted on time.

What are the rules on taking a course in Pass/Fail grade mode?

Certain courses may be taken on a Pass/Fail basis. For undergraduate ISyE students these are limited to free electives, humanities and the extra social science (not ECON, Psychology or BOR History requirement).

For non-ISyE courses, the maximum number of Pass/Fail credits is

  • 3 for those with total of 45 – 70 hours at Georgia Tech;
  • 6 for 71 – 90 at Georgia Tech
  • 9 for 91 or more at Georgia Tech.
What classes are eligible to be used as free electives?

Free electives can be classes such as social science classes, humanities classes, management classes, additional IE electives, etc.

Free Electives may not repeat the material in any other class used for the BSIE degree. For example, ISYE 3770/MATH 3770/ MGT 2250 do not satisfy a free elective for IE students because there is a required statistics class (ISYE 3030) in the curriculum.
Pre-calculus cannot be used as a free elective.
No CETL course can be used as free elective.

Classes that do not count as free electives for BSIE students include:
MATH 1711, MATH 1113
PHYS 2802 (Physics Help Class)
ISYE 3770/MATH 3770/ MGT 2250 (Management Statistics)
All CETL courses
Work or internship experiences
Any repeated class
Any class that duplicates any other class required for the BSIE degree
If in doubt, ASK YOUR ADVISOR!

What classes can I transfer into GT?

See the Transfer Equivalency Table. If the class is not listed on this table, you need to contact the advisor in that department to ask who handles transfer credit in their department.  For more information about transfer credit see the Catalog.

What classes count as social science and humanities electives?

Social Science Electives

Humanities Electives

What is ISyE policy for double counting a course as both a certificate requirement and a major requirement?

ISyE allows double counting for courses that are used toward a certificate as long as the Institute's guidelines are met.

What is ISyE’s policy for readmission after academic dismissal (drop)?

Students seeking readmission must contact an ISyE advisor no less than three weeks before the readmission deadline listed on the Registrar website. All documents must be submitted to Registrar before the readmission deadline to be considered.

 

Students who have been dropped from school because of unsatisfactory academic performance may not always be re-admitted. They are advised strongly to seriously consider their educational and career aims and to seek educational alternatives accordingly. Among these alternatives are non-technical as well as engineering technology programs at other institutions. The sobering fact that many students who have fared poorly here must often face is that their aptitude, preparation, or work habits may simply not be amenable to a successful experience at Tech. In such cases, neither the Institute nor ISyE does the student a favor by granting readmission.

On the other hand, some students perform poorly (and are dropped accordingly) because of emotional difficulties, family and/or personal problems, substance abuse, and the like. Certainly, if this is the case, the student must be prepared, at the time of the readmission application, to present evidence that such problems contributed to the prior difficulties and that they are presently being dealt with appropriately. Helpful in this regard is documentation from suitable professional sources (i.e., physicians, counselors, etc.).

Semesters away from Georgia Tech:  ISyE policy is that, void of extenuating circumstances, a student who has been dropped for unsatisfactory scholarship must remain out of school for at least 2 semesters (excluding summer semester). During this time, the student is urged to consider taking courses at an alternative institution. Demonstration of an ability to perform in a satisfactory manner accordingly and with regard to meaningful coursework strengthens the student's case for re-admission to Tech. Again, please take note that the ISyE department only provides a recommendation regarding re-admission. The final decision is made by the Institute Undergraduate Curriculum Committee.

Documents:

Readmission Application: Students must first submit a readmission application to Registrar (includes a payment of $30) before the deadline. This application will then be sent from Registrar to the ISyE Academic Office for review.

Petition to Faculty: Students must complete the petition to faculty form. The bottom of this form will be completed by an ISyE academic advisor. Students are also highly encouraged to attach a personal letter to the petition that addresses the committee and explains the students situation and reason they believe they should be allowed to return after dismissal.

Re-admission Contract: If re-admission is recommended by ISyE, the student will be asked to sign a contract which will include a program of study and a minimum grade point average which will assure a GPA of at least 2.0 at the end of the period described by the contract. Failure to meet any part of the contract will result in the student's dismissal from the institute. With this action, the student will also agree that no attempt will be made to seek further re-admission to ISyE.

 

A second academic dismissal (drop): Students are advised to review Section VIII, B.6 of the Student Rules and Regulations stating: "A student who is dropped a second time for unsatisfactory scholarship will not be re-admitted to the Institute."

What is my academic standing?

See the Registrar's official definition and restrictions associated with different academic standings.

What is the minimum GPA required to graduate with a BS IE?

The minimum GPA required for graduating with an undergraduate degree from Georgia Tech is 2.0.

Additionally, starting Spring 2015, all incoming new students into IE must have a minimum GPA of 2.0 in their ISYE prefix classes in order to graduate with a BS IE. ISYE 2699/2698/4698/4699/4802 are not included in this GPA calculation.

 

When can I get an "Incomplete" grade and how do I get it removed?

Definition of an "Incomplete" grade.

How to remove an "Incomplete" grade.

When do I apply for readmission?

See details in the Georgia Tech Catalog.

When do I submit a Petition to the Faculty?

Students may ask for relief from any of the Institute's rules and regulations by submitting a formal request to the Institute Undergraduate Curriculum Committee. The necessary form, called a Petition to the Faculty, can be obtained in the ISyE undergraduate office or from the registrar's website. A "Petition to the Faculty" form may be completed by a student when asking for an exception to an Institute rule or policy. Some examples of exception requests include:

  • To withdraw from school past the deadline
  • To be readmitted after being placed on DROP status
  • To extend the time to complete a thesis
  • To be granted an individual course substitution
  • To be granted full graduate standing

Typically, these petitions are granted when the student has been unjustly served by the regulations or when relief is requested from the consequences of a mistake over which the student had no control. Note, however, that these petitions will not be looked upon favorably if they seek protection from the consequences of your own carelessness.

A petitioner should complete the form, obtain the recommendation and signature of the undergraduate advisor or the Director of Undergraduate Studies, and submit the petition to the Registrar. Understand, however, that a departmental recommendation is not routine. If your case is not viewed as a legitimate one accordingly, do not expect a positive recommendation.

Registration

How do I get on the waitlist for a class?
  1. Log into Buzzport
  2. On the Home tab, locate the “REGISTRATION AND STUDENT SERVICES “ channel
  3. Select the “Registration – OSCAR” link
  4. Select “Student Services & Financial Aid"
  5. Select “Registration”
  6. Select “Look Up Classes”
  7. Perform a search for the course in which you are interested
  8. Once the results are returned, you may identify course sections using waitlist by the “WL” columns
  9. Take note of the Course Registration Number (CRN)
  10. Select “Add to Worksheet”
  11. Enter the course section CRN and Submit Changes
  12. Review your changes before exiting

 

How do I get overloads for ISyE courses?

ISyE does not grant overload requests. Please use the Waitlist function for all ISyE courses that are full. This will enforce a first come first served priority scheme. Degree candidates are given priority on the waitlist system.

How do I get permits for Senior Design, Graduate Courses, ISYE 4803, or Major Restrictions?
  • Senior Design Permits
    • Senior Design permits will be issued at the beginning of Phase II Registration, after your pre-proposal has been approved by the senior design coordinator.
    • No permits will be issued before the start of Phase II.
    • Senior Design Time Conflicts cannot be resolved. You cannot take courses that overlap with senior design times.
  • Graduate course permit - Undergraduate students are considered based on the following criteria: 
    • Students who intend to use graduate credits toward both the bachelor's and master's degrees in the same discipline at Georgia Tech may use up to 6 credit hours of graduate-level coursework in the major discipline. To qualify for this option, students must complete the undergraduate degree with a cumulative grade point average of 3.5 or higher and complete the master's degree within a two-year period from the award date of the bachelor's degree.
    • If the credits are not to be used towards the master degree, there is a minimum GPA requirement of 3.0.
    • Request for Approval for an Undergraduate to Register For Graduate Courses
  • ISYE 4803
    • If you get the error "DUPL CRSE WITH SEC-XXXXX" then you may be trying to register for two sections of ISYE 4803 Special Topics courses in the same semester. This is OK except that the system does not recognize that they are different classes. In this case you need to contact your advisor to give you the duplicate course override. Please do this before registration begins to prevent delay.

  • Major Restriction Permit
    • Beginning the last Wednesday of phase II registration, ISyE major restrictions are lifted for 2000 and most 3000 level courses. At this point, students outside ISyE will have the opportunity to register or join the waitlist. For all other ISyE courses, please check OSCAR for information regarding registration. No overload requests will be granted.
How do I get permits into non-ISyE courses?

ISyE personnel cannot grant permits for non-ISyE courses; each school controls permits and overloads for its courses.

  • Please be considerate of the workload pressures of the Academic Advisors in other departments when dealing with emails, walk-ins, and phone calls. They are doing all they can to accommodate students. 
  • Permits and Overload Departmental list
How do I register when an ISyE class is full?
  • ISyE students: Join the waitlist if a course is full/closed.
  • Non-ISyE students: Major restrictions will be lifted from the majority of the ISyE courses at noon on the last Wednesday of Phase II. Join the waitlist if a class you would like to sign up for is full/closed.
I have a hold on my account, how can I register?
  • Use the Instructions for Viewing Holds to view any holds before registration begins.
  • Students cannot register until all holds are removed. There are no exceptions to this.
  • Holds can only be removed by the department who placed the hold. Ex. if the Bursar's office placed the hold, ISyE cannot remove the hold for you. Only the Bursar's office can remove the hold.
  • Any holds issued through ISyE will NOT be removed over the phone. You must meet with an advisor to have the hold removed (in the office or virtually, under the COVID-19 situation).
What if I have a senior design conflict?

Senior Design Time Conflicts cannot be resolved. You cannot take courses that overlap with senior design times.

What is the thirty-six hour rule?

The final thirty-six hours earned for a degree must be taken in residence at Georgia Tech. Study Abroad experiences organized through Ga Tech's Office of International Education (OIE) do count as "in residence."

When can I start registering?

Time Tickets are determined by the Georgia Tech Registrar.

Check your Time Ticket information here.

Special Topics

 

Select a semester to view approved special topics courses

 

Engineering Electives

Important Notes - 2016-2017 Catalog or Later

  • You must take at least one of the following (3 credits each):

Course

Description

Credit

ECE 2020

Digital System Design

3

ECE 2026

Intro Signal Processing

3

ECE 3710 and ECE 3741

Circuits & Electronics & Instrum & Electronic Lab

3

  •  
  • The remaining 6 credits must satisfy the following:
    • Take at least 2 additional credits from Group 1
    • All Special Topics courses (4801/4803/4823, etc.) MUST be approved by your advisor. No SEMINARS may be used
    • YOU MUST MEET THE PRE-REQUISITE REQUIREMENTS FOR EACH COURSE
    • Some departments may only allow you to register during Phase II.
    • To satisfy Group 2 Engineering Elective credit, all Vertically-Integrated Projects (VIP) courses must be approved by the ISyE Associate Undergraduate Chair each semester, and at least three but no more than four credits of VIP coursework must be taken (typically, with the same project).
      • For a list of projects already approved or denied, please see the "Group 2 VIP Courses" tab on the left
      • Upon completion of at least 3 credit hours of VIP with the same project, please contact your assigned academic advisor to have the credits moved to Engineering Electives Group 2.
    • It is very rare for any research (within ISyE or otherwise) to be approved as an Engineering Elective.
    • PHYS 2021 (Solar System) will not be accepted for any Engineering Elective credit after Fall 2020.

Group 1

Course

Description

Credit

AE 2020

Low-Speed Aerodynamics

3

AE 2220

Dynamics

3

AE 3450

Thermodynamics & Comp Flow

3

BMED 2210 or BMED 2110

Conservation Principles in BME

3

BMED 3100

Systems Physiology

3

CEE 2040

Dynamics

{only students who have applied to graduate will be considered for a permit; contact your ISyE advisor}

2

CEE 2300

Environmental Engineering Principles 

{only students who have applied to graduate will be considered for a permit; contact your ISyE advisor}

3

CEE 3010

Geomatics 

{only students who have applied to graduate will be considered for a permit; contact your ISyE advisor}

3

CEE 4100

Construction Engr & Mgt 

{only students who have applied to graduate will be considered for a permit; contact your ISyE advisor}

3

CEE 4300

Environmental Engineering Systems

{only students who have applied to graduate will be considered for a permit; contact your ISyE advisor}

3

CEE 4600

Transportation Planning & Design 

{only students who have applied to graduate will be considered for a permit; contact your ISyE advisor}

3

ChBE 2100

Chemical Process Principles

3

ChBE 2130 (was 2110)

Chemical Engineering Therodynamics I

3

ChBE 4803

Biofuels, Bleaching and Paper making

3

ChBE 4763 / ME 4763

Pulping and Chemical Recovery

3

ChBE 4764 / ME 4764

Bleaching and Papermaking

3

COE 2001

Statics

2

COE 3001

Deformable Bodies

3

CS 2110

Computer Organization and Programming

4

CS 4641

Machine Learning

3

CS 3750 / PSYC 3750 or CS 3873 / CS 3751

User Interface Design

Title must be "Human-Computer Interaction" (for CS 3873)

3

CX 4010

Computational Problem Solving for Sci & Engr.

3

CX 4240

Computing for Data Analysis

3

CX 4242

Data and Visual Analytics

3

ECE 2020

Digital System Design

3

ECE 2026

Introduction to Signal Processing

3

ECE 2040

Circuit Analysis

3

ECE 3035

Mechanisms for Computing Systems

4

ECE 3076

Computer Communications

3

ECE 3710

Circuits and Electronics

2

ECE 3741

Instrumentation and Electronic Lab

1

ECE 4606

Wireless Communication

3

ME 2202

Dynamics of Rigid Bodies

3

ME 3015

System Dynamics & Control

4

ME 3322

Thermodynamics

3

ME 3720

Introduction to Fluid and Thermal Engineering3

3

MSE 2001

Principles & Applications of Engineering Materials

3

MSE 3012

Thermal & Transport Props

3

MSE 3015

Elc, Optical&Magnet Properties

3

MSE 4020

Design with Materials I

1

NRE 3301

Radiation Physics

3

PTFE 2200

Structure and Properties of Fibers and Polymers

3

PTFE 3200

Yarn and Fabric Formation

3

Group 2

Course

Description

Credit

AE 2801

Special Topics w/ COE 2001*

1

AE 3310

Introduction to Aerospace Vehicle Performance

3

AE 4701

Wind Engineering

3

AE 4370

Life Cycle Cost, Schrage

3

ARCH 6271

Healthcare Design of the Future

3

BIOS 2400

Mathematical Models in Biology

3

BIOS 4755 / MATH 4755

Mathematical Biology

3

BMED 3400

Intro to Biomechanics

4

BMED 2300 / BMED 2310

Introduction to BME Design

3

BME 4803

Global Health Engineering

3

BMED 4751 / MSE 4751

Introduction to Biomaterials

3

CEE 4225

Coastal Engineering

{only students who have applied to graduate will be considered for a permit; contact your ISyE advisor}

3

CEE 4330

Air Pollution Control Eng

{only students who have applied to graduate will be considered for a permit; contact your ISyE advisor}

3

CEE 4803

Freight Transportation Systems and Airport Plan

3

CEE 4803

Transportation Policy & Analysis

3

ChBE 4751 / MSE 4751

Intro to Biomaterials

3

COE 2701 / CS 2701 / MGT 4803

Startup Lab: Introduction to Technology Ventures

3

COE 3002

Intro to Microelec & Nano Revolution

3

CP 2233

Sustainable Urban Development

3

CP 4020

Introduction to Urban Regional Planning

3

CP 4105

Land Conservation

3

CP 4310

Urban Transportation

3

CP 4510

Introduction to Geographic Information Systems

3

CS 2801

Digital Design Lab for CS

1

ECE 2803

Grand Achievements and Grand Challenges

3

ECE 2811

Vertically-Integrated Projects (VIP) program

{See the Important Notes regarding VIP courses}

1 or 2

ECE 3811

Vertically-Integrated Projects (VIP) program

{See the Important Notes regarding VIP courses}

1 or 2

ECE 3812

Vertically-Integrated Projects (VIP) program

{See the Important Notes regarding VIP courses}

1 or 2

ECE 4811

Vertically-Integrated Projects (VIP) program

{See the Important Notes regarding VIP courses}

1 or 2

ECE 4812

Vertically-Integrated Projects (VIP) program

{See the Important Notes regarding VIP courses}

1 or 2

ECE 2031

Digital Design laboratory

2

ECE 4755 / MSE 4755

Substrate Fabrication

3

ECE 2893 / ME 2803

 

1 towards Engineering Elective

ISYE 4740 / ME 4740 / BIOL 4740 / PTFE 4740

Bioinspired Design

3

ISYE 4803

Model Based Systems Engineering

3

ME 2110

Creative Design & Decision Making

3

ME 2813 - GLE

Engineering & International Development

3

ME 3057

Experimental Methodology

3

ME 4803

Energy Systems Engineering

3

AE 4793 / ME 4793 / MSE 4793 / PTFE 4793

Composite Mtl Pros

3

MSE 2021

Characterization of Materials

3

MSE 2803

Historical Development of Engineering Materials

3

MSE 3300

Mat Sci & Eng of Sports

3

MSE 3801

 

1

MSE 3803

Optics and Soft Materials

3

MSE 4751 / BIOM 4751

Intro to Biomaterials

3

MSE 4801

Materials Entrepreneurship

1

MSE 4803

Soft Nano Materials

3

MSE 4803 / MSE 8803

Fundamentals of Nanomaterials & Energy

3

PHYS 4803

Nanoscale Physical Properties and Characterization

3

PHYS 2021

Solar Systems (* will not be accepted for Eng Elective credit after Fall 2020)

3

PTFE 3720 / MSE 3720

Introduction to Fiber Enterprise

3

PTFE 4043

Safety & Ethics

1

PTFE 4801

Title may vary each semester

1

VIP 2601 / VIP 3601 / VIP 3602 / VIP 4601 / VIP 4602 / VIP 4603

Vertically-Integrated Projects (VIP) program

{See the Important Notes regarding VIP courses}

1 or 2 or 3

Group 2 Vertically-Integrated Projects

Please see below for a list of approved and denied VIP projects. If the project in which you are interested is not on this list, please submit the Course Substitution Form to request that we review it for consideration as a Group 2 Engineering Elective.

To satisfy Group 2 Engineering Elective credit:

  • At least three but no more than four credits of VIP coursework must be taken with the same project over 2 consecutive semesters (with exceptions for summer and co-op/internship semesters).
    • View list below for a list of projects already approved or denied
    • Upon completion of at least 3 credit hours of VIP with the same project and in 2 consecutive semesters (with exceptions for summer and co-op/internship semesters), please contact your assigned academic advisor to have the credits moved to Engineering Electives Group 2.
    • VIP counts for free elective if not used for Engineering Elective.

VIP Project

Status

ACT Driving Simulator

Approved

Agile Communication Architecture

Approved

AI-based Discovery and Innovation

Approved

Art + AI

Approved

Automated Algorithm Design

Approved

Bits of Good

Approved

Diabetes and Chronic Disease Systems

Approved

eStadium

Approved

Getting to know U.

Approved

GT Mobile STEM Lab

Approved

Health Informatics

Approved

HumaniTech

Approved

Intelligent Transportation

Approved

M.A.R.S Marsian Adv

Approved

Reinventing Mobility in Atlanta

Approved

Smart and Connected Bioelectronics

Approved

Smart City Infrastructure

Approved

Spatiotemporal Modeling:  COVID-19

Approved

Stadium-IoP

Approved

Century Global Atlanta

Denied

Design Bloc

Denied

Engineering for Social Innovation

Denied

Global Social Entrepreneurship

Denied

IoT in Health

Denied

Sports Performance Intelligence Platforms

Denied

Wellbeing and Mental health

Denied

Environmental Requirements

ISyE requires that a BSIE student have one course that deals with the environment. Accordingly, the following list provides a sample of acceptable courses that satisfy the environmental requirement.

4-HOUR LAB SCIENCE REQUIREMENTS:

  • BIOS 1107 (was BIOL 1510) - Biological Principles
  • BIOS 1220 - Biology of Sex and Death
  • EAS 1600 - Introduction to Environmental Science
  • EAS 1601 - Habitable Plant
  • EAS 2600 - Earth Processes

SOCIAL SCIENCE ELECTIVES:

  • ECON 4440 - Economics of Environment

ENGINEERING ELECTIVES:

  • CEE 2300 - Environmental Engineering Principles
  • CEE 4300 - Environmental Engineering Systems
  • CP 2233 - Sustainable Urban Development

FREE ELECTIVES (Courses listed above may be used as free elective as well):

  • BIOS 2300 - Ecology
  • BIOL 2335 - General Ecology
  • EAS 2750 - Physics of the Weather
  • EAS 3110 - Energy, Environ, Society
  • EAS 4480 - Environ Data Analysis
  • ISyE 4501 - Energy, Efficiency, and Sustainability (Offered in Fall Semester, starting in Fall 2018 - replaces ISyE 4803 below)
  • (ISyE 4803 - Energy and Environmental Analysis (replaced by ISyE 4501, but will still be accepted))
  • PHYS 2750 - Physics of the Weather
  • SLS 3120 - Foundations of Sustainable Systems

There are other courses offered at Tech from time to time that will meet this requirement.  If you find a course that you wish to take and feel that the content qualifies, please contact your academic advisor for approval prior to enrolling.

Matching Courses to Concentrations

To determine your Catalog Year, you will need to access your DegreeWorks (via Buzzport) and then look for the BSIE - Degree Requirements row.  At the end of that row, your Catalog Year is listed above your GPA.

choosing catalog year

2019-2020 (and later) Catalog year

The table lists how the various concentration courses can be used to satisfy each concentration's requirements (please refer to the curriculum pages for the other rules that still must be observed):

Breadth or blank - Course can satisfy as a Breadth course if labeled as a Depth or Reqd for another concentration

Course Analytics and Data Science Economic and Financial Systems Operations Research Advanced Studies in Operations Research and Statistics * Quality and Statistics Supply Chain Engineering
ISYE 3039         Reqd
Course must be passed for that concentration
 
ISYE 3103           Reqd
Course must be passed for that concentration
ISYE 3104           Reqd
Course must be passed for that concentration
ISYE 3106 (was 3803) Breadth Breadth Breadth Breadth Breadth Breadth
ISYE 4034 Depth (B)
6 or 9 hours are required from this group
      Depth
You must take at least one Depth course from within that concentration
 
ISYE 4045 Depth (A)
3 or 6 hours are required from this group
  Reqd
Course must be passed for that concentration
     
ISYE 4111           Depth
You must take at least one Depth course from within that concentration
ISYE 4133 Depth (A)
3 or 6 hours are required from this group
  Depth
You must take at least one Depth course from within that concentration
Depth *
see the curriculum page for The Advanced Studies in OR and Statistics concentration course requirements
   
ISYE 4134 Depth (A)
3 or 6 hours are required from this group
  Depth
You must take at least one Depth course from within that concentration
     
ISYE 4232 Depth (A)
3 or 6 hours are required from this group
  Reqd
Course must be passed for that concentration
Depth *
see the curriculum page for The Advanced Studies in OR and Statistics concentration course requirements
   
ISYE 4301   Reqd
Course must be passed for that concentration
       
ISYE 4311   Reqd
Course must be passed for that concentration
       
ISYE 4501 Breadth Breadth Breadth Breadth Breadth Breadth
ISYE 4803
Reliability Engineering
        Depth
You must take at least one Depth course from within that concentration
 
ISYE 4803
Online Learn & Dec Making
Depth (B)
6 or 9 hours are required from this group
      Depth
You must take at least one Depth course from within that concentration
 
ISYE 4803
Intro to Machine Learning
Depth (B)
6 or 9 hours are required from this group
      Depth
You must take at least one Depth course from within that concentration
 
ISYE 4803
Systems Design for IEs
Breadth Breadth Breadth Breadth Breadth Breadth
ISYE 4803
Adv Manufacturing
          Depth
You must take at least one Depth course from within that concentration
ISYE 4803
Facility Layout and Warehousing
          Depth
You must take at least one Depth course from within that concentration
ISYE 4803
Financial Data Analysis
Depth (B)
6 or 9 hours are required from this group
Depth
You must take at least one Depth course from within that concentration
    Depth
You must take at least one Depth course from within that concentration
 
ISYE 4803
Decision Analysis & Risk Mgt
Breadth Breadth Breadth Breadth Breadth Breadth
ISYE 4803
Design of  Experiments
        Reqd
Course must be passed for that concentration
 
ISYE 4803
Health Systems Engineering
Breadth Breadth Breadth Breadth Breadth Breadth
ISYE 4803
Linear & Convex Optimization
    Depth
You must take at least one Depth course from within that concentration
     
ISYE 4803
Energy and Green Economy
Breadth Breadth Breadth Breadth Breadth Breadth
ISYE 4803
Fdns and Apps Machine Learning
Depth (B)
6 or 9 hours are required from this group
         
ISYE 4803
Foundations of Modern Data Science
Depth (B)
6 or 9 hours are required from this group
         
ISYE 4803
Network Science and Analysis
Depth (B)
6 or 9 hours are required from this group
         
ISYE 4803
Proj Eval-People, Planet, and Profit
Breadth Breadth Breadth Breadth Breadth Breadth
ISYE 4803
Tools for Data Analytics
Depth (B)
6 or 9 hours are required from this group
         
ISYE 4803
Introduction to Bioinformatics
Breadth Breadth Breadth Breadth Breadth Breadth
ISYE 4803
Nonlinear Opt Applic to ML&Eng
Depth (A)
3 or 6 hours are required from this group; replaces ISYE 4134
  Depth
You must take at least one Depth course from within that concentration; replaces ISYE 4133 or ISYE 4134
     
ISYE 4803
Public Health Systems
Breadth Breadth Breadth Breadth Breadth Breadth
 
ECON 3150   Depth
You must take at least one Depth course from within that concentration
       
ECON 4340   Depth
You must take at least one Depth course from within that concentration
       
ECON 4350   Depth
You must take at least one Depth course from within that concentration
       
MGT 3078   Depth
You must take at least one Depth course from within that concentration
       
CS 4641 Depth (B)
6 or 9 hours are required from this group
      Depth
You must take at least one Depth course from within that concentration
 
CX 4240 Depth (B)
6 or 9 hours are required from this group
      Depth
You must take at least one Depth course from within that concentration
 
CX 4242         Depth
You must take at least one Depth course from within that concentration
 
MATH 4262         Depth
You must take at least one Depth course from within that concentration
 

 

Note that under the 2019-2020 Catalog, the General concentration consists of any five concentration classes (prior approval by the ISyE Associate Chair for Undergraduate Studies is required in order to include more than one Special Topics course (ISYE 3803 or ISYE 4803) that is not a depth/required course for the other concentrations).

BSIE Courses That Cannot Both be Taken for Credit

**For information on major restrictions, please view the OSCAR Schedule of Classes.**

The following pairs of courses have significant overlap in content. These courses cannot both be taken for credit.

* Courses are part of the core ISyE curriculum

  • APPH 1040 * & HPS 1040 *
  • APPH 1050 * & HPS 1040 *
  • ECE 2020 * & ECE 2030
  • ECON 2100 * & ECON 2101 *
  • ECON 2100 * & ECON 2105 *
  • ECON 2100 * & ECON 2106 *
  • ECON 2101 * & ECON 2105 *
  • ECON 2101 * & ECON 2106 *
  • INTA 1200 * & POL 1101 *
  • MATH 2406 & MATH 2803 HEH
  • MATH 4803 MOR (Spr13) & MATH 3803 MOR (Spr15)
  • MGT 3000 * & ACCT 2101 *
  • MGT 3000 * & ACCT 2102
  • MGT 3062 & MGT 3078 *
  • MGT 3076 & MGT 3078 *
  • MGT 3101 & MGT 3150 *
  • MGT 3607 & MGT 4803 (Business Ethics)
  • MGT 4043 & MGT 4803 (Advanced Financial Reporting)
  • MGT 4106 & MGT 4803 (Teamwork in Organizations)
  • MGT 4116 & MGT 4803 (Gender & Ethnicity in US & Global Org)
  • MGT 4194 & MGT 4803 (Social Entrepreneurship and Enterprise).
  • MGT 4308 & MGT 4803 (Advertising & Promotions)
  • MGT 4309 & MGT 4803 (Services Marketing)
  • MGT 4311 & MGT 4803 (Digital Marketing)
  • MGT 4341 & MGT 4803 (Management of Healthcare Operation)
  • MGT 4367 & MGT 4803 (Revenue Analytics)

Find your Academic Advisor below based on the first letter of your last name

James Turneur
Academic Advisor
Last names: A-F
Frances Buser
Academic Advisor
Last names: G-L
Sudie Pennebaker Davis
Academic Advisor
Last names: M-R
Jon Lowe
Academic Advisor
Last names: S-Z